Top 4 Die Casting Companies in Malaysia (2026)

Introduction

This is a verified shortlist of Malaysia’s top five die casting companies, evaluated across years of operation, alloy capabilities, industries served, certifications, and export track record. Written for procurement officers, product engineers, and business owners who need to identify a reliable die casting partner without sifting through unverified directories. Each entry has been confirmed against the company’s official website and at least one independent source.

> The companies listed here are not ranked in any particular order and the selection is based on our perspective. We encourage readers to contact the companies directly to confirm suitability, pricing, and features for their business needs. All information is correct at the time of writing and you may reach out to us if you find any details that need updates or corrections.

Comparison Table

Note: These are industrial B2B manufacturers. Google consumer review counts are not applicable as a selection criterion for this category. Ratings are omitted rather than fabricated.

What Is Die Casting and Why Does It Matter for Malaysian Manufacturing?

Die casting forces molten metal under high pressure into reusable moulds to produce precise, repeatable components. Malaysia is a genuinely strategic location for this process, sitting close to automotive OEMs, electronics multinationals, and established export corridors to the United States, Europe, and Japan. The sector feeds automotive, electronics, aerospace, and medical device supply chains.

Two alloys dominate local production. Aluminium is the workhorse: lightweight, dimensionally stable, with strong corrosion resistance, which is why it shows up everywhere from engine components to consumer electronics housings. Zinc alloys are a different proposition entirely. Exceptional castability, fine surface detail, and high impact resistance make zinc the preferred choice for thin-wall components where aluminium simply can’t hold the geometry.

How Did We Select These 4 Die Casting Companies?

Every company on this list had to clear four non-negotiable criteria. Minimum 10 years of verified Malaysian operations. Service to at least two distinct industries. Aluminium or zinc high-pressure die casting as a core service, not a side offering. And a verifiable Malaysian registered address confirmed through the company’s official website or a government-linked business registry.

The list is not ordered by revenue. Frankly, private Malaysian manufacturers rarely publish financial data, and revenue figures from third-party databases are frequently estimates with wide error margins. Operational breadth, verifiable certifications, and documented export milestones tell a procurement team far more than an unverifiable revenue ranking ever could.

All five companies have publicly accessible websites and confirmed physical Malaysian addresses. If a company couldn’t be verified through its own official domain, it was excluded. Simple rule.

Top 4 Die Casting Companies in Malaysia

1. ARRK Asia

Rating: Not publicly listed (B2B manufacturer)
Founded: 1948 (Osaka, Japan); Malaysian operations (Sales Offices) established subsequently
Location: Petaling Jaya, Selangor (HQ) and Bayan Lepas, Penang
Website: asia.arrk.com

Founded in 1948 in Osaka, ARRK has grown into a global product development operation with over 3,300 employees across 20+ locations worldwide. Malaysian offices sit at Block E-10-01, Oasis Ara Damansara, Jalan PJU 1A/7, Ara Damansara, 47301 Petaling Jaya, Selangor, and at Ideal Avenue 1-3-12, Medan Kampung Relau 1, 11900 Bayan Lepas, Penang. Clients consistently cite same-day quotation turnaround, frequent project status updates, and reliable on-time delivery. ARRK Malaysia holds DIN EN ISO 9001:2015 certification, which is a prerequisite for working with most automotive companies worldwide.

The real differentiator here is integration. ARRK can take a product from concept validation through to low volume production under one roof, covering rapid prototyping, CNC machining, injection moulding, die casting, vacuum casting, and rapid tooling. The team uses advanced simulation software to optimise casting processes before metal ever gets poured. Die casting adheres to ISO 2768 dimensional accuracy standards. Industries served include automotive, aerospace, medical, defence, and consumer electronics. For product developers who want to stress-test a design before committing to mass tooling investment, that breadth matters.

Best Suited For: Product developers and OEMs who need a single partner for prototyping, design validation, and volume die casting across automotive, aerospace, medical, and electronics applications.

2. HICOM Diecastings Sdn Bhd

Rating: Not publicly listed (B2B manufacturer)
Founded: 1985
Location: Shah Alam, Selangor
Website: hdsb.com.my

Incorporated in 1985 and wholly owned by HICOM Engineering Sdn Bhd, itself a subsidiary of DRB-HICOM, this company has built more than four decades of operational history in high-pressure aluminium die casting. It supplies die cast products to over 100 customers worldwide. Registered address: Lot 16, Jalan Sementa 27/91, Section 27, 40000 Shah Alam, Selangor Darul Ehsan, Malaysia. The parent company, DRB-HICOM Berhad, is listed on the main board of Bursa Malaysia. That corporate governance transparency is genuinely rare among private die casters, and it matters when you’re qualifying a long-term supplier.

HICOM holds the largest high-pressure die casting tonnage in Malaysia. That’s not a marketing claim; it’s a concrete capacity differentiator for buyers running high-volume programmes. The company operates under Advanced Product Quality Planning (APQP) and Project Management Tools endorsed by PMI, and holds ISO 14001 environmental management certification. Export credentials are the other strong point. Verified milestones include commissioning the Oil Pump Line for PROTON, exporting the first Steering Housing to the USA, a Mazda Motor Corporation appointment for the S8 bracket project, and a Magna cover water pump export to Mexico. Those aren’t domestic pilot runs. That’s international-grade quality compliance, proven in practice.

Best Suited For: High-volume automotive and motorcycle OEM suppliers who need a Tier-1 certified Malaysian manufacturer with proven export credentials to Japan, the USA, and Mexico.

3. EKO Industries

Rating: Not publicly listed (B2B manufacturer)
Founded: 2000
Location: Bukit Mertajam, Pulau Pinang
Website: ekoindustries.com

EKO started in 2000 in a light industrial workshop. Today it’s one of the more internationally connected manufacturers on this list, supplying precision die casting, CNC machining, sheet metal fabrication, and value-added services to customers in the USA, Malaysia, and beyond. Headquarters: Lot 667 and 668, Juru, 14000 Bukit Mertajam, Pulau Pinang, Malaysia. The export reach is specific and verifiable: the USA, Mexico, Sweden, Poland, Europe, Japan, China, and Thailand. That’s not a vague “we export globally” claim. It means EKO has cleared customs, met material traceability requirements, and satisfied dimensional inspection standards across multiple continents. For buyers who need parts delivered to Western markets, that track record is worth more than any brochure.

The company operates through two subsidiaries. EKO Metal Industries Sdn Bhd (EMI) specialises in aluminium and zinc precision die-casting products. EKO Industrial Parts Sdn Bhd (EIP) covers sheet metal chassis, covers, box-builds, aluminium extrusion, metal stamping panels, and machining parts. Buyers can source die cast components and fabricated enclosures from one group, which cuts vendor management overhead considerably. EKO runs both hot chamber die casting (suited to zinc and low-melting-point alloys, faster cycle times) and cold chamber (required for aluminium, higher injection pressures). Parts manufactured include medical devices, industrial equipment, and recreational vehicles.

Best Suited For: Buyers who need a Malaysian manufacturer with proven export logistics to the USA and Europe, or who require both die casting and sheet metal fabrication from one supplier group.

4. Sena Diecasting Industries

Rating: Not publicly listed (B2B manufacturer)
Founded: 1996
Location: Nilai, Negeri Sembilan (HQ casting); Sg. Buloh, Selangor (plating division)
Website: senadiecasting.com.my

Sena Diecasting Industries (SDI) has over two decades of experience manufacturing for brand names worldwide, with a customer retention rate it attributes to a stringent quality control system and 5S Management. HQ casting facility: Lot 131, Jalan Permata 2, Kawasan Perindustrian Arab Malaysian, 71800 Nilai, Negeri Sembilan, Malaysia. Dedicated plating division in Sg. Buloh, Selangor. Over 80% of Sena’s customers are international, primarily in the USA, South America, the UK, Netherlands, Germany, China, Japan, Thailand, Singapore, and India. That’s a strong signal for export-focused buyers evaluating supplier risk.

Here’s what sets Sena apart from most Malaysian die casters: in-house chrome plating and powder coating. Most competitors outsource surface finishing, which adds lead time and introduces a second quality control variable you don’t control. Sena brings that entire step inside the same operation. Products span automotive, lighting, electrical and electronic, medical equipment, oil and gas equipment, and other sectors. Cold-chamber machines run from 350 to 1,000 tons, with standard alloys including ADC12, A380, ADC10, LM6, A413, and A360.

Best Suited For: Buyers in automotive, oil and gas, lighting, or medical equipment who want to reduce supply chain complexity by sourcing casting, machining, and surface finishing from a single vendor.

What Should You Look for When Choosing a Die Casting Company in Malaysia?

Choosing the wrong die casting partner is expensive. Tooling costs are non-trivial, and switching suppliers mid-project means re-qualifying new moulds from scratch. These are the factors that actually separate a reliable partner from a costly mistake.

Confirm alloy compatibility before anything else

Not every die caster works with every alloy. Aluminium ADC12 is the workhorse of Malaysian automotive and electronics casting. Zinc ZAMAK suits thin-wall, high-detail components. Ask the vendor to confirm which specific alloy grades they stock and process regularly, not just which materials they theoretically “can” work with.

Verify certifications with actual documents

For general manufacturing, ISO 9001 (quality management) and ISO 14001 (environmental management) are the baseline. For automotive supply chains, ask specifically for IATF 16949 certification or APQP compliance. ISO 9001 alone is not enough. Request the actual certificate with its expiry date. A logo on a website proves nothing.

Clarify tooling ownership in writing

Tooling ownership is the contract term most buyers overlook until it’s too late. If the manufacturer owns the die, switching suppliers becomes costly because you’ll pay for new tooling at the next vendor. Confirm in writing whether you own the die outright upon payment, or whether conditions are attached.

Assess secondary process capability

If your part requires CNC machining, plating, powder coating, or assembly after casting, ask whether those operations are done in-house or outsourced. Each outsourced step adds lead time and a quality handoff point you can’t directly audit.

Check export track record if you need international delivery

Verified export history to the USA, Europe, or Japan is not marketing copy. It means the vendor understands customs documentation, material traceability requirements, and the dimensional inspection standards that international OEMs actually enforce.

Understand MOQ and lead time realities

Die casting tooling investment is front-loaded. For large production volumes it becomes cost-effective in ways that SLS or CNC machining simply can’t match. But if you’re running a low-volume programme or a startup project, ask vendors directly about minimum order quantities. Some manufacturers have a floor below which tooling amortisation doesn’t work in your favour, and the honest ones will tell you upfront.

Red Flags to Avoid When Choosing a Die Casting Company in Malaysia

No mould flow simulation capability

A poorly designed mould produces defects: incomplete filling, shrinkage, warpage. Any vendor who can’t demonstrate simulation software for mould flow analysis is asking you to absorb avoidable defect risk. Ask to see a sample simulation report before committing.

Certifications that cannot be verified

A certification logo on a website means nothing without a document number, issuing body, and expiry date. If a vendor can’t produce the actual certificate on request, treat the claim as unverified. This is especially critical for automotive programmes where IATF 16949 is a supply chain requirement.

Vague answers about quality inspection equipment

Reputable die casters use 3D coordinate measuring machines (CMM) and, for structural parts, fluoroscopic X-ray examination to detect internal porosity. If a vendor’s quality section mentions only “visual inspection” or “sampling,” probe harder. Ask specifically: do you produce CMM dimensional reports per batch?

No physical address or factory visit option

A vendor who can’t provide a verifiable Malaysian registered address or declines a factory audit request is a procurement risk. Full stop. All five companies on this list have confirmed physical addresses. Any vendor outside this list who can’t provide the same deserves serious scrutiny.

Unrealistically short lead times without explanation

Die casting involves mould fabrication, trial shots, and first-article inspection before production begins. A vendor promising production parts in two weeks for a brand-new tool is either quoting from an existing mould or overpromising. Ask for a detailed project timeline that separates tooling lead time from production lead time. Those are two different things.

Frequently Asked Questions About Die Casting in Malaysia

1. What is die casting and how is it used in Malaysia?

Die casting forces molten metal under high pressure into reusable moulds to produce precise, repeatable components. In Malaysia, it serves the automotive, electronics, medical, and industrial sectors, supported by the country’s proximity to major OEM supply chains across Southeast Asia.

2. Which die casting company in Malaysia is best for automotive parts?

HICOM Diecastings holds the largest high-pressure die casting tonnage in Malaysia and is widely regarded as the country’s leading automotive die caster. It supplies die cast products to over 100 customers worldwide, with verified export projects for PROTON, Mazda, and international Tier-1 suppliers.

3. Does ARRK Asia offer die casting services in Malaysia?

Yes. ARRK Asia provides die casting services across Malaysia, Singapore, and Thailand, operating from offices in Petaling Jaya, Selangor and Bayan Lepas, Penang. Full details at asia.arrk.com/die-casting-manufacturer/.

4. What certifications should I look for in a Malaysian die casting company?

For general manufacturing: ISO 9001 and ISO 14001. For automotive supply chains, IATF 16949 certification or APQP compliance is the industry standard. Always request the actual certificate document with an expiry date, not just a logo.

5. What is the difference between aluminium and zinc die casting?

Aluminium is lightweight, dimensionally stable, and corrosion-resistant, making it the standard choice for automotive components and electronics housings. Zinc (ZAMAK) offers high strength, hardness, excellent electrical and thermal conductivity, and superior casting accuracy, which is why it’s preferred for complex thin-wall components where surface detail matters.

6. Can Malaysian die casting companies export internationally?

Yes, and several on this list have documented proof. EKO Industries currently supplies parts to the United States, Mexico, Sweden, Poland, Europe, Japan, China, and Thailand. Sena Diecasting serves customers in the USA, South America, the UK, Netherlands, Germany, China, Japan, Thailand, Singapore, and India. Both track records are confirmed through their official websites.

Conclusion

The right die casting partner depends entirely on your production profile. Validating a new product design before committing to volume tooling? ARRK Asia is the only company on this list offering a full prototyping-to-production stack. High-volume automotive supplier needing maximum tonnage and Tier-1 credentials? HICOM Diecastings is the clear answer. Running a Western export programme that needs proven customs and logistics experience? EKO Industries has documented shipments to the USA, Europe, and Japan. Part requires casting plus surface finishing under one roof? Sena Diecasting’s in-house chrome plating and powder coating lines remove a bottleneck that trips up most supply chains.

Use the comparison table at the top to match your use case to the right shortlist. Then contact each vendor directly, request material certifications, sample CMM reports, and a tooling ownership clause, and get those in writing before signing anything.